Τα Προϊόντα μας
Ανεμιστήρες & εξαεριστήρας συλλεκτών σκόνης αερίου αποβλήτων για το βιομηχανικό λέβητα μεταλλουργίας
Metallurgy Industrial Boiler Waste Gas Dust Collecting Blower Fan Introduction The 7-09 series medium pressure centrifugal fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. It’s a widely used medium-pressure heavy-duty
Προκληθείσα έλξης λεβήτων μέση πίεση ανεμιστήρων ανεμιστήρων εμπορική φυγοκεντρική
Industrial Boiler Induced Draught Medium Pressure Centrifugal Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low noise. It
Προς τα πίσω καμμμένος φυγοκεντρικός ανεμιστήρας ανεμιστήρων PA σε δυναμικό λεβήτων που ισορροπείται
Efficient Energy-Saving Backward Curved Industrial Boiler PA Boiler Fan Introduction The Efficient Energy-Saving Backward Curved Industrial Boiler PA Boiler Fan centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It
Με κάρβουνο λεβήτων ανεμιστήρων ενιαίος ανεμιστήρας ανεμιστήρων εξάτμισης αναρρόφησης φυγοκεντρικός
Antifraying Energy Saving Coal-Fired Boiler Single Suction Air Fan Introduction 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,
Αναγκασμένος σχεδίων λεβήτων Fd ανεμιστήρων πλήρης βιομηχανικός φυγοκεντρικός ανεμιστήρας κολπίσκων εντύπου Q235 ενιαίος
Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan Introduction The Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials.
Οπίσθια κυρτή λεπίδων λεβήτων ανεμιστήρων SWSI αντοχή ανεμιστήρων υψηλή
Backward Curved High Wear Resistance Centrifugal Boiler Blower Fan Introduction The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device. Use liquid lubricating oil. It is not necessary to open the bearing housing to replace and fill the lubricating oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of
Φυγοκεντρικό SIMO λεβήτων διάσπασης νιτρικών αερίου σωλήνων αντι λειαντικό ανεμιστήρων ανεμιστήρων
Anti Abrasive Industrial Boiler Flue Gas Denitrification Centrifugal Boiler Fan Introduction The Anti Abrasive Industrial Boiler Flue Gas Denitrification Centrifugal Boiler Fan a special dust-discharging fan designed jointly by the fan industry. It has the characteristics of not easy dust accumulation and wear resistant, high efficiency and low noise. This series is a range of centrifugal fans with a wide range of performance. It is suitable for discharging gas containing
Ενιαίοι ανεμιστήρες αέρα χαμηλότατης πίεσης μεγάλης ποσότητας ανεμιστήρων λεβήτων αναρρόφησης
Single Suction High Volume Industrial Forced Draught Boiler Fan Introduction The Single Suction High Volume Industrial Boiler Forced Draught Boiler Fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area.The fan system running at normal
Βιομηχανική προστασία έκρηξης ανεμιστήρων ανεμιστήρων SIMO λεβήτων εξάτμισης
Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan Introduction The Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard
Υψηλός αέρα ροής ταυτότητας λεβήτων ανεμιστήρας εξάτμισης ανεμιστήρων αντιδιαβρωτικός
High Air Flow Corrosion Resistant Industrial Boiler ID Boiler Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above
Μεγάλος φυγοκεντρικός ανεμιστήρας συλλεκτών σκόνης αερίου αποβλήτων λεβήτων ανεμιστήρων SIMO
Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan Introduction The Stainless Steel Large Capacity Industrial Boiler Waste Gas Dust Collecting Boiler Fan have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous
Με κάρβουνο υψηλή αποδοτική ενέργεια εξαερισμού ανεμιστήρων λεβήτων - αποταμίευση
Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan Introduction The Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving
Εσωτερικοί χαμηλού θορύβου φυγοκεντρικοί ανεμιστήρες εξάτμισης ανεμιστήρων χημικοί βιομηχανικοί
Coupling Driving Heat Dissipation Antiwear Chemical Industry Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings.It can be used to input gas as well as to output gas.The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in
Τριφασικός ηλεκτρικός ανεμιστήρας τσιμέντου μηχανών 75kw
75kw Three Phase Electrical Motor Cement Kilns Cooling Duct Fan Detail introduction : 75kw Three Phase Electrical Motor Cement Kilns Cooling Duct Fan is a fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are
Μεταλλουργία που ασβεστοποιεί προκληθε'ντα ανεμιστήρα ανεμιστήρων έλξης κλιβάνων το σαλιγκάρι
Metallurgy Induced Draught Calcining Kilns Snail Fan Blower Introduction: The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Metallurgy Induced
Φυγοκεντρικός ανεμιστήρας λεβήτων έκρηξης CFB SWSI βιομηχανικός
Industrial Explosion Protection CFB Boiler Centrifugal Blower Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the
Q345 Β Drive ανεμιστήρας λεβήτων ατμού 660V 1400mm ζωνών
Q345 V-Belt Driving Long Lifetime Steam Boiler Blower Fan Introduction 1. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users’ investment and maintenance. 2. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. 3. The weld of the impeller and the main shaft are ultrasonic flaw detection to ensure
Ενιαίος φυγοκεντρικός 6kv 670t/H αναρρόφησης μπροστινός ανεμιστήρας λεβήτων Sa
Single Suction Forward Industrial Boiler SA Centrifugal Fan Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,
