Τα Προϊόντα μας
Κραμάτων χάλυβα σκόνης μακροχρόνια διάρκεια ζωής ανεμιστήρων συλλεκτών φυγοκεντρική Explosionproof
Alloy Steel Long Lifetime Explosionproof Dust Collector Centrifugal Fan Detail introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. The motor shaft is elastically connected with the
Φουρνίζει την υψηλή ενεργειακή αποδοτικότητα ροής αέρα ανεμιστήρων συλλεκτών σκόνης ψύξης
High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering
Εναλλασσόμενου ρεύματος μηχανών βιομηχανικός ανεμιστήρας αερίου σωλήνων αέρα λεβήτων αρχικός υψηλής θερμοκρασίας
AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
Οπίσθιος κυρτός βαρέων καθηκόντων βιομηχανικός ανεμιστήρων αερίου σωλήνων για τη συμπύκνωση της μηχανής
Heavy Duty Industrial Backward Curved Sintering Machine Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
Βιομηχανικός ανεμιστήρας αερίου σωλήνων περιστροφικών κλιβάνων ασβέστη ενεργειακής αποδοτικότητας explosionproof
Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media
Μακράς διαρκείας ενιαίος κολπίσκος ανεμιστήρων συλλεκτών σκόνης ενεργειακής αποδοτικότητας
Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to
Ανεμιστήρας 4486 ~ 8971m3/h ανεμιστήρων τσιμέντου εξάτμισης Antifraying μηχανών εναλλασσόμενου ρεύματος
AC Motor AC Motor Antifraying Exhaust Cement Blower Fan Introduction The 7-08. series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data series
Q235 ενιαία μακροχρόνια διάρκεια ζωής κολπίσκων που ξεραίνει τον ανεμιστήρα υλικού χειρισμού
Q235 Single Inlet Long Lifetime Drying Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty
10635~12427Pa ξήρανση υλικών υψηλών φυγοκεντρική ανεμιστήρων μπροστινή
High Pressure Forward Materials Drying Stainless Steel Blower Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium
Ανοξείδωτο Β προσανατολισμένη προς τη ζώνη βιομηχανική φυγοκεντρική Explosionproof ξήρανση ανεμιστήρων
Stainless Steel V-Belt Driven Explosionproof Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional
Q235 οι ενιαίοι βιομηχανικοί φυγοκεντρικοί θαυμαστές κολπίσκων διαβιβάζουν το λέβητα CFB
Q235 Single Inlet Forward CFB Boiler Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing
Ενιαίος κολπίσκων φούρνος φυσήματος υψηλών φυγοκεντρικός ανεμιστήρων υψηλής θερμοκρασίας
Single Inlet High Temperature Blast Furnace High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and
Μακρύ χυτήριο απόδειξης γδαρσίματος ανεμιστήρων υψηλών ανεμιστήρων διάρκειας ζωής
Long Lifetime Abrasion Proof Foundry High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and non
Προσανατολισμένη προς ψύξη τοίχων φούρνων υψηλών φυγοκεντρική ανεμιστήρων μηχανών εναλλασσόμενου ρεύματος τη σύζευξη
AC Motor Coupling Driven Oven Wall Cooling High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in
Ενέργεια - ο λέβητας μύλων άνθρακα αποταμίευσης έκαμψε προς τα πίσω τη φυγοκεντρική μεγάλη περιεκτικότητα ανεμιστήρων
Energy Saving Large Capacity Coal Mill Backward Curved Boiler Fan Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. Technical data series model Rotation Speed (r/min) Total
HG785 Explosionproof αποδοτική ενέργεια ανεμιστήρων λεβήτων αναμιγμένου χάλυβα οπίσθια - αποταμίευση
HG785 Alloyed Steel Explosionproof Efficient Energy-Saving Backward Boiler Fan Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It has a larger output flow than the 5-11 series. It is also used to transport a variety of common gases and hard materials in the industrial field, the application object is exactly the same as 5-11 series fan. The fan speed can be flexibly set by matching
Συνδέοντας Drive έγχυση άνθρακα ανοξείδωτου ανεμιστήρων επαγωγής σχεδίων
Coupling Driving Stainless Steel Coal Injection Induced Draft Fan Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers
Αναμιγμένοι αλουμίνιο μπροστινοί προκληθε'ντες βιομηχανικοί κλίβανοι ανεμιστήρων σχεδίων
Aluminium Alloyed Forward Industrial Kilns Induced Draft Fan Introduction Of Centrifugal Fan 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance. For extremely high temperature operating conditions, can
