"general ventilation fan"

5-55-12.5C high temperature centrifugal fan Y5-55 boiler centrifugal induced draft fan product overview The centrifugal induced draft fan of Y5-55 boiler is designed for the industrial boiler (1 ~ 20T/h) which is equipped with smoke removal device and burning all kinds of coal. The maximum temperature shall not exceed 250℃ if the air intake condition is the same and the performance is suitable. Before the induced draft fan, the dust removal device with an efficiency of not

Flue Gas Dilution Fan Dilution Air Fan Dilution fan_Ammonia dilution fan desulfurization system The function of dilution fan Dilution fan The dilution fan dilutes the ammonia gas to a certain ratio and sprays it into the flue of the reactor to prevent the mixture of ammonia gas and air from reaching an explosive ratio, thereby causing danger. Each unit is equipped with two dilution fans, one conveyor and one backup. Dilution fan test run and chain protection Generally, the

Low Pressure Coupling Driving Antifraying Industrial Boiler SA Centrifugal Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are

Aluminium Alloyed Single Inlet Large Capacity Exhaust Centrifugal Flow Fan Introduction The 4-16 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It can also be made into explosion-proof and flame

Alloy Steel V-Belt Driven Backward Curved Cooling Centrifugal Flow Fan Introduction It can also be made into explosion-proof and flame-retardant type according to the requirements of use. It is suitable for occasions with flammable, explosive and corrosive gases. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80°C, and similar gas properties are also available.

Double Suction High Pressure Backward Metallurgy Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 9-08 7.1D 2900 10635～12427 12292

AC Motor Long Life Material Handling Blower Materials Drying Centrifugal Fan Introduction The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan

Materials Drying Long Life Wear Resistant High Temperature Centrifugal Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. It is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general ventilator for ventilation. Product features 1.It can output

Single Inlet Heavy Duty Centrifugal Fans Wear Resistant Fluidized Bed Boiler Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The fan shaft power will not exceed the motor rated power regardless the operation point of the stable working range. Customers can use it without any