"centrifugal air blower"

Προσαρμόσιμος φυσητήρας υψηλής πίεσης για μεταφορά υλικού με λειτουργία χαμηλού θορύβου. Διαθέτει ανθεκτική στη φθορά κατασκευή, πολλαπλές επιλογές υλικών και ευέλικτες διαμορφώσεις μετάδοσης κίνησης. Πιστοποιημένο CE, ISO 9001 με παράδοση 30 ημερών.

Φυγοκεντρικός ανεμιστήρας υψηλής απόδοσης για βιομηχανικό αερισμό μεγάλης κλίμακας. Διαθέτει σχεδιασμό χωρίς υπερφόρτωση, εξοικονόμηση ενέργειας και στιβαρή κατασκευή. Προσαρμόσιμο σε μέγεθος, μονάδα δίσκου και υλικά με υποστήριξη OEM/ODM.

Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan Introduction The Q345 Industrial Explosion Protection Industrial Boiler Exhaust Boiler Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard

V-Belt Driving Medium Pressure Explosionproof Centrifugal Flow Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The impeller is annealed to completely

Industrial Heavy Duty Heat Dissipation Industrial Centrifugal Fans Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the service

High Pressure Explosion Proofing Industrial Boiler Centrifugal Fan Introduction The 9-11 series fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. 1. When the airflow resistance is increased, the motor load will be automatically reduced and the motor

Long Life Forward Alloy Steel Oven Wall Cooling Centrifugal Flow Fan Introduction 1. Fan systems with impeller diameters less than 1400 mm at normal temperature do not require additional bearing cooling devices, reducing users’ investment and maintenance. 2. The impeller is annealed to eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks. 3. The weld of the impeller and the main shaft are ultrasonic flaw

Aluminum Alloy Backward Curved Impeller High Temperature Centrifugal Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in high

High-Strength Alloyed Steel Metallikon Ventilating Fan Centrifugal Blower Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Application Centrifugal fan is